After installing your system using the printed installation guide that came with your system, make sure your cable connections are correct. You can do this using the cable connections diagram in your installation guide. The sample connections diagram below is from the installation guide for Fit Kit 810-0027-01.
To power on your system:
- Press the power button on the Wheelman. The power button LED displays green (solid on). The photos below show the Wheelman powered off (left) and powered on (right).
- Flip the power switch (on the power switch cable) to the on position; this powers on the antenna and the Remote IMU (RIMU). The switch LED displays red (solid on). The photos below show the power switch off (left) and on (right)